Hamar Machine Axis Alignment Instructions
Geometric alignment of linear axis, rotary axis and reference target
Verification date: 2026-10-24
View original public information →LSP206 · Transportation equipment manufacturing and maintenance tooling · Rail transit and wheel-rail facilities
Need to add new core
Three-dimensional registration front end of hatch positioning target
Facing the aircraft door assembly frame, using lattice three-dimensional positioning as the observation route, multi-viewpoint correspondence is planned to be output. The page is for project evaluation and does not mean that the development has been completed or has been accepted on site.
Project Judgment Summary
Product/DeviceAircraft door assembly rack
Measure routePOSE·lattice three-dimensional positioning
Ability GradingNeed to add new core
Verification statusThe actual machine/product domain acceptance of this scenario has not been carried out
Scene nature:Similar potential application scenarios for laser spots. The potential application scenario has not yet been developed into a complete product system; the actual machine/product domain acceptance of this scenario has not been carried out. The actual product/product domain acceptance quantity in catalog statistics is 0.
Business tasks and intended output
- target audience
- Aircraft door assembly rack: lattice three-dimensional positioning
- pseudo output
- Multi-viewpoint correspondence
- Applicable conditions
- Requires SE(3) and complete spatial calibration
- priority
- Special development. The measurement/control core needs to be supplemented and verified according to the special project approval
Imaging input and algorithm routing
Imaging and device conditions
Numbered projection points or targets, multi-view/known target geometry, and camera calibration. Manufacturing or testing stations with fixed reference targets and independent pose/displacement datums
POSE·lattice three-dimensional positioning
Numbered projection points or targets, multi-view/known target geometry and camera calibration
- A39Multi-view checkerboard camera calibration
- A40Image and point dedistortion
- A102Multi-laser spot connected domain candidate extraction
- A108One-to-one matching of multi-laser spot reference bits
- A111laser spot pixel to camera view angle conversion
Existing algorithmic evidence:A101–A112 only complete analytical synthesis spot and controlled geometry verification; see laser_spot_benchmark.json
Current capabilities and capabilities to be supplemented
Need to add new core
Need to add core computing
Light point extraction can only be used as an observation front-end, and core capabilities such as three-dimensional reconstruction, closed-loop control, wavefront or physical quantity inversion need to be developed and verified separately.
Gaps in this scenario:Three-dimensional correspondence, PnP/triangulation, SE(3) external parameters and hand-eye calibration need to be added; A42 is only two-dimensional. Requires SE(3) and full space calibration. It is only used for manufacturing measurement and testing, and does not directly bear the responsibility for operational safety judgments.
Route-level gaps:Three-dimensional correspondence, PnP/triangulation, SE(3) external parameters and hand-eye calibration need to be added; A42 is only two-dimensional
"New cores required" only describes the relative development volume and does not constitute a commitment to accuracy, tempo, stability or delivery time.
Verification methods and acceptance prerequisites
Test occlusion, symmetry and degraded poses against a 3D/robot or 6DOF reference platform. Special gauge, three-coordinate or standard motion table cross test
| Acceptance items | Evidence required for project confirmation | Current status |
|---|---|---|
| Inputs and samples | Real device original frames, normal/abnormal samples, exposure and light path conditions, sample grouping and set aside | Not provided, waiting for project input |
| Magnitude and Error | Independent reference value, calibration record, error statistical caliber and mutual confirmation threshold | Not verified |
| Exceptions and boundaries | Anticipated handling of missed detections, false detections, overexposure, occlusion, reflection, out-of-view and communication abnormalities | To be defined |
| System integration | Interface, time synchronization, deployment platform, tempo, log, version and continuous running record | Not integrated |
Evidence sources and citation boundaries
The source supports measurement principles or similar applications; the module combination, device and acceptance method in this scenario are engineering derivation, and product verification has not been completed.
Hamar hole system alignment instructions
Hole target adapter aligned with reference axis
Verification date: 2026-10-24
View original public information →NIST 3D Imaging Technology Description
Active point triangulation, scanned geometry and error propagation
Verification date: 2026-10-24
View original public information →Source usage scope:The public information is used to support the measurement principle or the existence of similar applications, and does not prove that this scenario has been developed, deployed or accepted by Jishi Technology.
Project consultation
xuzhiyang0928@gmail.com
Define the Development Scope with Samples and Device Requirements
Three-dimensional registration front end of hatch positioning target
Please describe the task object, original picture or video, target indicators, device platform, interface and sample situation.
Phone: 13910119357xuzhiyang0928@gmail.com