Ophir VCSEL measurements
VCSEL emission array and beam morphology measurement categories
Verification date: 2026-10-24
View original public information →LSP029 · VCSEL and emission array · Semiconductor wafer and packaging
Partially reusable
Repeatability of launch point position under trigger conditions
For the pulse VCSEL module, the light spot timing and drift are used as the observation route, and the planned output triggering rounds are discrete with the center. The page is for project evaluation and does not mean that the development has been completed or has been accepted on site.
Project Judgment Summary
Product/DevicePulse VCSEL module
Measure routeTIME · Light spot timing and drift
Ability GradingPartially reusable
Verification statusThe actual machine/product domain acceptance of this scenario has not been carried out
Scene nature:Similar potential application scenarios for laser spots. The potential application scenario has not yet been developed into a complete product system; the actual machine/product domain acceptance of this scenario has not been carried out. The actual product/product domain acceptance quantity in catalog statistics is 0.
Business tasks and intended output
- target audience
- Pulsed VCSEL module: spot timing and drift
- pseudo output
- Trigger rounds and center discretization
- Applicable conditions
- The camera does not measure nanosecond pulse width and peak power.
- priority
- General extension. Verification needs to be completed according to the listed optical conditions, calibration and samples.
Imaging input and algorithm routing
Imaging and device conditions
Global shutter or known readout timing, saves timestamps, and exposures adapted to frequency of motion. Near-infrared response detector, synchronized triggering and separable near/far field point imaging
TIME · Light spot timing and drift
Global shutter or known readout timing, saves timestamps, exposures fit to frequency of motion
- A22Kalman filter
- A25Welch power spectrum estimation
- A72Hampel median absolute deviation anomaly filtering
- A101Adaptive threshold laser spot grayscale centroid
- A107Laser spot quality and usability diagnostics
- A112Laser spot two-dimensional repeatability and coverage ellipse
Existing algorithmic evidence:A101–A112 only complete analytical synthesis spot and controlled geometry verification; see laser_spot_benchmark.json
Current capabilities and capabilities to be supplemented
Partially reusable
Requires calibration, synchronization or integration
The light point detection front-end or timing statistics module can be reused, but the project still needs to add geometric calibration, time synchronization, motion compensation or equipment system integration.
Gaps in this scenario:Requires sampling rate/exposure verification, time synchronization and reference target camera motion compensation; not a substitute for laser Doppler vibrometers. The camera does not measure nanosecond pulse width and peak power. The number of light points and the number of physical emission units do not have to correspond one to one.
Route-level gaps:Requires sampling rate/exposure verification, time synchronization and reference target camera motion compensation; not a substitute for laser Doppler vibrometers
"Partially reusable" only describes the relative development volume and does not constitute a commitment to accuracy, tempo, stability or delivery time.
Verification methods and acceptance prerequisites
Verify aliasing, phase, drift and frame loss with a known frequency shaker or encoder comparison. Cross-check with micrographs, independent radiometers and design arrays
| Acceptance items | Evidence required for project confirmation | Current status |
|---|---|---|
| Inputs and samples | Real device original frames, normal/abnormal samples, exposure and light path conditions, sample grouping and set aside | Not provided, waiting for project input |
| Magnitude and Error | Independent reference value, calibration record, error statistical caliber and mutual confirmation threshold | Not verified |
| Exceptions and boundaries | Anticipated handling of missed detections, false detections, overexposure, occlusion, reflection, out-of-view and communication abnormalities | To be defined |
| System integration | Interface, time synchronization, deployment platform, tempo, log, version and continuous running record | Not integrated |
Evidence sources and citation boundaries
The source supports measurement principles or similar applications; the module combination, device and acceptance method in this scenario are engineering derivation, and product verification has not been completed.
Ophir wide angle divergent beam
Imaging conditions for far-field acquisition and wide-angle beam
Verification date: 2026-10-24
View original public information →Source usage scope:The public information is used to support the measurement principle or the existence of similar applications, and does not prove that this scenario has been developed, deployed or accepted by Jishi Technology.
Project consultation
xuzhiyang0928@gmail.com
Define the Development Scope with Samples and Device Requirements
Repeatability of launch point position under trigger conditions
Please describe the task object, original picture or video, target indicators, device platform, interface and sample situation.
Phone: 13910119357xuzhiyang0928@gmail.com